-
Quickview
2WD 15,000 Series
Performance DynamometersThe 15,000 series is capable of supporting speeds of 240+ MPH and 2400+ HP. The maximum axle weight is 14,000 lbs and the track width range is 30"-102". The 15,000 series chassis dyno?s are also upgradeable for the DC-PAU-750 center-mounted eddy brake for steady state testing, which can support an additional 850+ HP. For high torque applications such as diesel testing or high horsepower drag cars, the DC-PAU-750 offers the world?s largest eddy brake capable of support over 3000 ft lbs of torque. View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you?ve made to the engine?s fuel or timing maps. The 15,000 Series incorporates stainless steel coverings wrapped around a massive welded hybrid-pyramid frame. This revolutionary new frame design has form and function and allows for better braking and smoother operation. The 15,000 Series comes standard with our X Factor Knurling option which provides the highest traction over all other competitors. The optional eddy brake assembly sits directly on the shaft between the two rolls - no need to couple with a belt or universal joint all power is directly transferred from the wheels to the load cell.$36,995.00$36,995.00 -
Quickview
2WD 15,000 Series Mobile
Mobile (Portable) DynamometersAre you tight on shop space? Landlord won't let you dig a pit? Want to go to car shows, pit-side at a track or portable and go to other speed shops? Dynocom recognized the need to make units portable and has introduced a truly high performance, DOT approved trailer/dynamometer system. This is a heavy duty dyno with a heavy duty trailer: 12,000 GVW towing weight is 9000 lbs Trailer is 41-42 inches high x 102? inches wide 24? foot level deck the ramps extend 3? feet on each side (total length fully extended is 26? feet) Ramps on both side of the trailer prevent you from having to reverse off the dyno - simply drive forward. You can use any standard truck with a ball to tow these trailers or available in a Gooseneck.$59,995.00$59,995.00 -
Quickview
2WD 15000 Pit Cover
Pit CoversHeavy duty plate 1/4 Inch diamond plate pit covers for in-ground applications (available for all Dynocom Chassis Dyno Systems).$1,495.00$1,495.00 -
$13,995.00
-
Quickview
2WD 21,000 Series
Performance DynamometersThe 21,000 series dynamometer offers the best horsepower and speed ratings in a compact unit. Consisting of twin 36" diameter wide rolls. The total mechanical equivalent inertia is approximately 2400 lbs. Maximum axle weight is 12,000 lbs, track width range is 102". The 21,000 series is perfect for diesel, high torque and high speed applications. The 21,000 series dyno comes standard with our X Factor Knurling option which provides the highest traction over all other competitors. The 21,000 is easily the world's best engineered dynamometer as the eddy brake sits directly on the shaft between the two rolls - no need to couple with a belt or universal joint all power is directly transferred from the wheels to the load cell. The 21,000 series is not only designed for ultra-high horsepower vehicles but provides the utmost in accuracy and repeatability for all testing scenarios -drag strip, steady state, acceleration and coast-down tests. Large roll dyno's offer minimal tire deformation and maximum contact patch area providing repeatability and accuracy from test to test.$52,995.00$52,995.00 -
$14,995.00
-
Quickview
2WD 30,000 Series
Performance DynamometersThe 30,000 series is our largest unit consisting of twin 48" diameter 28"wide rolls. The total mechanical equivalent inertia is approximately 3000 lbs. Maximum axle weight is 8000 lbs, track width range is 28"-86". The 30,000 series is not only designed for ultra-high horsepower vehicles but provides the utmost in accuracy and repeatability for all testing scenarios -drag strip, steady state, acceleration and coast-down tests. Upgradeable for eddy brake through a convention belt-driven system. Large roll dyno's offer minimal tire deformation and maximum contact patch area providing repeatability and accuracy from test to test. The choice for OEM?s.$59,995.00$59,995.00 -
$0.00
-
$0.00
-
Quickview
2WD 4000 Series
Hub & Axle DynosSPECIFICATIONS: • Max Current Per Pod 25 Amps • Rated Voltage (DC) 192 VDC • Input Power 240 VAC¹ • Estimated Inertia Per Pod 8 kg m2 • Max Braking Torque Per Pod 3040 ft lbs • Nominal Braking Torque Per Pod² 2400 ft lbs • Maximum Axle Weight Per Pod 1800 lbs PRICE INCLUDES: • 2 X DYNAMOMETER POD’S (WITH DUAL EDDY CURRENT BRAKES) • INTEGRATED LED LIGHTING • INTEGRATED COOLING FANS • FULL ANTI-VIBRATION SUPPORT BASE - DYNOCOM EXCLUSIVE (NO OTHER EDDY BRAKE HUB/POD DYNO HAS THIS) • HIGH TORQUE FLEX DISK COUPLING - DYNOCOM EXCLUSIVE (NO OTHER EDDY BRAKE HUB/POD DYNO HAS THIS) • INTEGRATED POWER METER - DYNOCOM EXCLUSIVE • FULLY MOBILE ALLOWING MOVEMENT / STORAGE WITHIN YOUR SHOP • LARGER HIGH TORQUE WHEEL HUBS - WHICH ALLOW 4, 5, 6 AND 8 LUG PATTERNS (30 DEGREE TAPER FOR EASY INSTALLATION) - DYNOCOM EXCLUSIVE, OUR WHEEL HUBS ARE THE LARGEST IN THE INDUSTRY. • ULTRA FAST PHASE ANGLE POWER CONTROL UNITS - FOR SMOOTH STEADY STATE HOLDING • PATENTED AND MADE IN THE USA • QUANTUM SOFTWARE WITH USB SECURITY KEY • DYNOCOM DC-CONTROLLER W/ 4 DIFFERENTIAL ANALOG INPUTS • 2 X DC-JBOX – FOR I/O • WIDEBAND AFR/LAMBDA METER WITH NTK OXYGEN SENSOR AND CANBUS • DC-HANDHELD –DIGITAL BACKLIT LCD • ATMOSPHERIC MODULE ( HUMIDITY, BAROMETRIC PRESSURE AND TEMPERATURE ) • OPTICAL PICKUP WITH MAGNETIC BASE • LIFETIME FREE TECHNICAL SUPPORT • TRAINING AT OUR FORT WORTH, TEXAS LOCATION • 2 X DYNOCOM RACING SHIRTS • 1 X DYNOCOM SHOP BANNER$57,995.00$57,995.00 -
$1,250.00
-
$4,995.00
-
$1,250.00
-
$1,295.00
-
Quickview
2WD 5000 Series
Performance DynamometersThe 5000 series is the world's best built 8.75 Inch cradle roll dynamometer. The 5000 Series dynamometer is capable of supporting speeds up to 175+ MPH and 5000+ ft lbs of torque. The maximum axle weight is 6,500 lbs and the track width range is 36"-86". The 5000 was designed for a variety of different testing scenarios – FWD/RWD Cars, Sport Compacts, Diesel Trucks, Motorcycles and ATV’s. With stainless steel coverings and zinc plated CNC knurled rollers this dyno is equipped to handle all of your company’s needs. Ideal for portability when equipped with the caster/dolly kit. Standard with integrated LED lighting, patented taper shaft design for the highest load and torque. Integrated cooling fans for the Frenelsa eddybrake which increases load testing time and cools the 2K load cell. Equipped with a Frenesla eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. • View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you’ve made to the engine’s fuel or timing maps. • Diagnose engine and drivetrain problems. • Troubleshoot drivability issues. • Run track ¼ mile or circle track lap simulations with reaction times that you determine in the software parameters. • Bi-Directional roller for testing of both RWD and FWD vehicles. The 5000 Series is fully upgradeable in the field, it can be coupled with any other Dynocom Chassis Dynamometer (5000,7500, 15,000, or DC POD’s) for All-Wheel-Drive Testing. TORQUE: 5000 Ft lbs MAX SPEED: 175+ MPH ROLL DIAMETER: 8.5 Inch AIR REQUIREMENTS: 90 PSI POWER REQUIREMENTS: 220/240 Volt • CHASSIS DYNAMOMETER WITH FRENESLA EDDY BRAKE • DYNOCOMPUTE SOFTWARE W/MANUAL • 2 X SAFETY STABILIZER ROLLERS • INTEGRATED COOLING FANS FOR FRENELSA EDDY BRAKE/2K LOAD CELL • INTEGRATED LED LIGHTING • DYNOCOM DC-CONTROLLER W/ 4 DIFFERENTIAL ANALOG I$26,995.00$26,995.00 -
$1,500.00