2WD 5000 Series

2WD 5000 Series

$26,995.00

The 5000 series is the world’s best built 8.75 Inch cradle roll dynamometer. The 5000 Series dynamometer is capable of supporting speeds up to 175+ MPH and 5000+ ft lbs of torque. The maximum axle weight is 6,500 lbs and the track width range is 36″-86″. The 5000 was designed for a variety of different testing scenarios – FWD/RWD Cars, Sport Compacts, Diesel Trucks, Motorcycles and ATV’s. With stainless steel coverings and zinc plated CNC knurled rollers this dyno is equipped to handle all of your company’s needs. Ideal for portability when equipped with the caster/dolly kit. Standard with integrated LED lighting, patented taper shaft design for the highest load and torque. Integrated cooling fans for the Frenelsa eddybrake which increases load testing time and cools the 2K load cell. Equipped with a Frenesla eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. • View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you’ve made to the engine’s fuel or timing maps. • Diagnose engine and drivetrain problems. • Troubleshoot drivability issues. • Run track ¼ mile or circle track lap simulations with reaction times that you determine in the software parameters. • Bi-Directional roller for testing of both RWD and FWD vehicles. The 5000 Series is fully upgradeable in the field, it can be coupled with any other Dynocom Chassis Dynamometer (5000,7500, 15,000, or DC POD’s) for All-Wheel-Drive Testing.

 

TORQUE: 5000 Ft lbs
MAX SPEED: 175+ MPH
ROLL DIAMETER: 8.5 Inch
AIR REQUIREMENTS: 90 PSI
POWER REQUIREMENTS: 220/240 Volt
• CHASSIS DYNAMOMETER WITH FRENESLA EDDY BRAKE • DYNOCOMPUTE SOFTWARE W/MANUAL • 2 X SAFETY STABILIZER ROLLERS • INTEGRATED COOLING FANS FOR FRENELSA EDDY BRAKE/2K LOAD CELL • INTEGRATED LED LIGHTING • DYNOCOM DC-CONTROLLER W/ 4 DIFFERENTIAL ANALOG I

000

The 5000 series is the world’s best built 8.75 Inch cradle roll dynamometer. The 5000 Series dynamometer is capable of supporting speeds up to 175+ MPH and 5000+ ft lbs of torque. The maximum axle weight is 6,500 lbs and the track width range is 36″-86″. The 5000 was designed for a variety of different testing scenarios – FWD/RWD Cars, Sport Compacts, Diesel Trucks, Motorcycles and ATV’s. With stainless steel coverings and zinc plated CNC knurled rollers this dyno is equipped to handle all of your company’s needs. Ideal for portability when equipped with the caster/dolly kit. Standard with integrated LED lighting, patented taper shaft design for the highest load and torque. Integrated cooling fans for the Frenelsa eddybrake which increases load testing time and cools the 2K load cell. Equipped with a Frenesla eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. • View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you’ve made to the engine’s fuel or timing maps. • Diagnose engine and drivetrain problems. • Troubleshoot drivability issues. • Run track ¼ mile or circle track lap simulations with reaction times that you determine in the software parameters. • Bi-Directional roller for testing of both RWD and FWD vehicles. The 5000 Series is fully upgradeable in the field, it can be coupled with any other Dynocom Chassis Dynamometer (5000,7500, 15,000, or DC POD’s) for All-Wheel-Drive Testing.

TORQUE: 5000 Ft lbs
MAX SPEED: 175+ MPH
ROLL DIAMETER: 8.5 Inch
AIR REQUIREMENTS: 90 PSI
POWER REQUIREMENTS: 220/240 Volt
• CHASSIS DYNAMOMETER WITH FRENESLA EDDY BRAKE • DYNOCOMPUTE SOFTWARE W/MANUAL • 2 X SAFETY STABILIZER ROLLERS • INTEGRATED COOLING FANS FOR FRENELSA EDDY BRAKE/2K LOAD CELL • INTEGRATED LED LIGHTING • DYNOCOM DC-CONTROLLER W/ 4 DIFFERENTIAL ANALOG I