-
$62,995.00Quickview
2WD 4000 Series
Hub & Axle DynosSPECIFICATIONS: • Max Current Per Pod 25 Amps • Rated Voltage (DC) 192 VDC • Input Power 240 VAC¹ • Estimated Inertia Per Pod 8 kg m2 • Max Braking Torque Per Pod 3040 ft lbs • Nominal Braking Torque Per Pod² 2400 ft lbs • Maximum Axle Weight Per Pod 1800 lbs PRICE INCLUDES: • 2 X DYNAMOMETER POD’S (WITH DUAL EDDY CURRENT BRAKES) • INTEGRATED LED LIGHTING • INTEGRATED COOLING FANS • FULL ANTI-VIBRATION SUPPORT BASE - DYNOCOM EXCLUSIVE (NO OTHER EDDY BRAKE HUB/POD DYNO HAS THIS) • HIGH TORQUE FLEX DISK COUPLING - DYNOCOM EXCLUSIVE (NO OTHER EDDY BRAKE HUB/POD DYNO HAS THIS) • INTEGRATED POWER METER - DYNOCOM EXCLUSIVE • FULLY MOBILE ALLOWING MOVEMENT / STORAGE WITHIN YOUR SHOP • LARGER HIGH TORQUE WHEEL HUBS - WHICH ALLOW 4, 5, 6 AND 8 LUG PATTERNS (30 DEGREE TAPER FOR EASY INSTALLATION) - DYNOCOM EXCLUSIVE, OUR WHEEL HUBS ARE THE LARGEST IN THE INDUSTRY. • ULTRA FAST PHASE ANGLE POWER CONTROL UNITS - FOR SMOOTH STEADY STATE HOLDING • PATENTED AND MADE IN THE USA • QUANTUM SOFTWARE WITH USB SECURITY KEY • DYNOCOM DC-CONTROLLER W/ 4 DIFFERENTIAL ANALOG INPUTS • 2 X DC-JBOX – FOR I/O • WIDEBAND AFR/LAMBDA METER WITH NTK OXYGEN SENSOR AND CANBUS • DC-HANDHELD –DIGITAL BACKLIT LCD • ATMOSPHERIC MODULE ( HUMIDITY, BAROMETRIC PRESSURE AND TEMPERATURE ) • OPTICAL PICKUP WITH MAGNETIC BASE • LIFETIME FREE TECHNICAL SUPPORT • TRAINING AT OUR FORT WORTH, TEXAS LOCATION • 2 X DYNOCOM RACING SHIRTS • 1 X DYNOCOM SHOP BANNER$62,995.00$62,995.00 -
$92,995.00Quickview
5500 Series TriPods
Hub & Axle DynosThe DC TriPod is the world?s most advanced and powerful hub/axle dynamometer. Dynocom has developed the world?s first, truly compact, and portable high performance and advanced bolt-on dynamometer system with integrated Eddy Current brakes and a massive custom gearbox for the ultimate in dynamometer testing. Incorporated within the dynamometer enclosure are 4 x F150 Frenesla Eddy Brakes, coupled with a custom designed planetary type gearbox. The gearbox allows the eddy brakes to spin faster for higher efficiency, improved cooling, increased torque due to the torque multiplication of the gear ratio. Furthermore the friction profile of the gearbox mimics road load drag of real world testing situations. The unique design of the TriPod allows scalability for growth with provisions to add an AC Motor, Hydraulic Drives or Motorcycle Drag Roller in the future.$92,995.00$92,995.00 -
$115,000.00Quickview
7500 Series TriPods
Hub & Axle DynosThe DC TriPod is the worlds most advanced and powerful hub/axle dynamometer. Dynocom has developed the worlds first, truly compact, and portable high performance and advanced bolt-on dynamometer system with integrated Eddy Current brakes and a massive custom gearbox for the ultimate in dynamometer testing. Incorporated within the dynamometer enclosure are 6 x F150 Frenesla Eddy Brakes, coupled with a custom designed planetary type gearbox. The gearbox allows the eddy brakes to spin faster for higher efficiency, improved cooling, increased torque due to the torque multiplication of the gear ratio. Furthermore the friction profile of the gearbox mimics road load drag of real world testing situations. The unique design of the TriPod allows scalability for growth with provisions to add an AC Motor, Hydraulic Drives or Motorcycle Drag Roller in the future.$115,000.00$115,000.00 -
$145,000.00Quickview
7500HT Plus “KONG”
Hub & Axle DynosMax Steady State Torque: 42,250 lbs (total)
Max HP(based on RPM): 8200+ HP
Max Speed(based on Tire Diam) 210 MPH
Number of Eddy Brakes: 3 per side ( 6 total )
Electrical Requirements: 240VAC @ 50Amps per unit ( 100 amps total )
Enhanced H/D Features: Larger Diameter Outrigger arms 3” Solid, HD 9310 Steel Driveshafts, 6” HD Increased Height Base Support, Larger H/D Output shaft U-Joint, HT GearDrive/Transmission, “KONG” Graphics color scheme
$145,000.00 -
$89,995.00Quickview
AWD 2000 POD
Hub & Axle DynosPREFACE Dynocom has introduced the world’s first affordable, truly compact, high performance and advanced bolt-on dynamometer system with integrated load utilizing advanced, high performing, revolutionary designed power absorption units (PAUs) incorporated within the dynamometer enclosure. This design allows for the first compact load-capable portable dynamometer by eliminating the need for expensive and invasive water-brake absorption units which may be a source of failure. It is equipped with an eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. • View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you've made to the engine's fuel or timing maps. • Diagnose engine and drivetrain problems. • Troubleshoot drivability issues. • Run track ¼ mile or circle track lap simulations with reaction times that you determine in the software parameters. ¹- Three Phase Recommended for Maximum Performance. Using Two Phase will drop Braking Torque by approx.. 20-25%. Increasing the incoming AC voltage can proportionally increase the rated Torque output. Maximum AC Voltage is 400 VAC. ²-Average Braking Torque after approximate 2 minutes of continuous use operated at full output power ( i.e. 100% duty cycle ) NOTE: HP ratings are dependent on RMP and Torque absorbed. When determining maximum values during operation one must determine the maximum toque a vehicle can put down at the axle by multiplying maximum rated engine torque by gear ratio of operating transmission gear and final drive ratio PRICE INCLUDES:$89,995.00- 4 X DYNAMOMETER POD’S (4 x EDDY CURRENT BRAKES)
- QUANTUM SOFTWARE WITH USB SECURITY KEY
- DYNOCOM DC-CONTROLLER W/ 4 DIFFERENTIAL ANALOG INPUTS
- 2 X DC-JBOX – FOR I/O
- WIDEBAND AFR/LAMBDA METER WITH NTK OXYGEN SENSOR
- DC-HANDHELD –DIGITAL BACKLIT LCD
- ATMOSPHERIC MODULE ( HUMIDITY, BAROMETRIC PRESSURE AND TEMPERATURE )
- OPTICAL PICKUP WITH MAGNETIC BASE
- LIFETIME FREE TECHNICAL SUPPORT
- TRAINING AT OUR FORT WORTH, TEXAS LOCATION
- 2 X DYNOCOM RACING SHIRTS
- 1 X DYNOCOM SHOP BANNER
- ONE YEAR WARRANTY ON ALL MECHANICALS (REPLACEMENT PARTS
$89,995.00 -
$145,000.00Quickview
AWD 4000 Series
Hub & Axle DynosPRICE INCLUDES: - 4 X DYNAMOMETER POD?S (WITH F250 GR CM EDDY CURRENT BRAKES) - 4 X INTEGRATED LED LIGHTING - 4 X INTEGRATED COOLING FANS - FULL ANTI-VIBRATION SUPPORT BASE - DYNOCOM EXCLUSIVE (NO OTHER EDDY BRAKE HUB/POD DYNO HAS THIS) - HIGH TORQUE FLEX DISK COUPLING - DYNOCOM EXCLUSIVE (NO OTHER EDDY BRAKE HUB/POD DYNO HAS THIS) - 4 X INTEGRATED POWER METERS - DYNOCOM EXCLUSIVE - FULLY MOBILE ALLOWING MOVEMENT / STORAGE WITHIN YOUR SHOP - LARGER HIGH TORQUE WHEEL HUBS - WHICH ALLOW 4, 5, 6 AND 8 LUG PATTERNS (30 DEGREE TAPER FOR EASY INSTALLATION) - DYNOCOM EXCLUSIVE, OUR WHEEL HUBS ARE THE LARGEST IN THE INDUSTRY. - ULTRA FAST PHASE ANGLE POWER CONTROL UNITS -FOR SMOOTH STEADY STATE HOLDING - PATENTED AND MADE IN THE USA - QUANTUM SOFTWARE WITH USB SECURITY KEY - DYNOCOM DC-CONTROLLER W/ 4 DIFFERENTIAL ANALOG INPUTS - 2 X DC-JBOX ? FOR I/O - WIDEBAND AFR/LAMBDA METER WITH NTK OXYGEN SENSOR - DC-HANDHELD ?DIGITAL BACKLIT LCD - ATMOSPHERIC MODULE ( HUMIDITY, BAROMETRIC PRESSURE AND TEMPERATURE ) - OPTICAL PICKUP WITH MAGNETIC BASE - LIFETIME FREE TECHNICAL SUPPORT - ONE YEAR FREE SOFTWARE UPDATES - TRAINING AT OUR FORT WORTH, TEXAS LOCATION - 2 X DYNOCOM RACING SHIRTS - 1 X DYNOCOM SHOP BANNER - ONE YEAR WARRANTY ON ALL MECHANICALS (REPLACEMENT PARTS)$145,000.00$145,000.00 -
$49,995.00Quickview
DYNO X DC POD PLUS
Hub & Axle DynosDyno X Hub Dynos are rated for 1800 HP 300MPH . Dynocom has introduced the world's first affordable, truly compact, high performance and advanced bolt-on dynamometer system with integrated load utilizing advanced, high performing, revolutionary designed power absorption units (PAUs) incorporated within the dynamometer enclosure. This design allows for the first compact load-capable portable dynamometer by eliminating the need for expensive and invasive water-brake absorption units which may be a source of failure.$49,995.00$49,995.00