The 5000 series is the world's best built 8.75 Inch cradle roll dynamometer. The 5000 Series dynamometer is capable of supporting speeds up to 175+ MPH and 5000+ ft lbs of torque. The maximum axle weight is 6,500 lbs and the track width range is 36"-86". The 5000 was designed for a variety of different testing scenarios – FWD/RWD Cars, Sport Compacts, Diesel Trucks, Motorcycles and ATV’s. With stainless steel coverings and zinc plated CNC knurled rollers this dyno is equipped to handle all of your company’s needs. Ideal for portability when equipped with the caster/dolly kit. Standard with integrated LED lighting, patented taper shaft design for the highest load and torque. Integrated cooling fans for the Frenelsa eddybrake which increases load testing time and cools the 2K load cell.
Equipped with a Frenesla eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. • View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you’ve made to the engine’s fuel or timing maps. • Diagnose engine and drivetrain problems. • Troubleshoot drivability issues. • Run track ¼ mile or circle track lap simulations with reaction times that you determine in the software parameters. • Bi-Directional roller for testing of both RWD and FWD vehicles. The 5000 Series is fully upgradeable in the field, it can be coupled with any other Dynocom Chassis Dynamometer (5000,7500, 15,000, or DC POD’s) for All-Wheel-Drive Testing.
TORQUE: 5000 Ft lbs MAX SPEED: 175+ MPH ROLL DIAMETER: 8.5 Inch AIR REQUIREMENTS: 90 PSI POWER REQUIREMENTS: 220/240 Volt
• CHASSIS DYNAMOMETER WITH FRENESLA EDDY BRAKE
• DYNOCOMPUTE SOFTWARE W/MANUAL
• 2 X SAFETY STABILIZER ROLLERS
• INTEGRATED COOLING FANS FOR FRENELSA EDDY BRAKE/2K LOAD CELL
• INTEGRATED LED LIGHTING
• DYNOCOM DC-CONTROLLER W/ 4 DIFFERENTIAL ANALOG I
2WD 5000 Ramp: Dynocom's aluminum ramps are the perfect combination of strength and weight. The price includes a pair of straight aluminum ramps with hook ends, 120 in length, 20 in width,5000 lb capacity per axle, 8500 lb capacity per vehicle.
2WD 5000 Pit Cover:
2WD 5000 Above Ground Kit AGK:
2WD 5000 Air Bag Lift Kit:
2WD 5000 Caster/Dolly Kit:
DC 5 Gas Analyzer: Look no farther than the DC-5 GAS for your gas analyzer needs. This all-in-one, portable machine meets BAR and OIML standards and will provide you with an emission diagnostics and trouble-shooting tool that will drastically reduce your diagnostic and tune-up time.
DC-5 GAS analyzer measures five emission gases, including Hydrocarbons (HC), Carbon Monoxide (CO), Carbon Dioxide (CO2), Oxygen (O2) and Oxides of Nitrogen (NOX). Based on gas concentrations,
DC-5 GAS will calculate the Air to Fuel Ratio (AFR), Lambda () and Grams per
Mile (GPM). It will also provide a read-out for an optional Tachometer that handles up to 30,000 RPM. With this much information in one place, you can diagnose and tune any fuel-related issues while having all of the relevant information displayed in six super-bright, oversized displays.
In addition to the above features, you can measure exhaust gases from two tail pipes and average the readings or set up an exhaust dilution value to warn you if there are air-leaks in the exhaust system. With the standard 12VDC jack in addition to the 110VAC-230VAC, you can connect the DC-5 GAS to the car battery or cigarette lighter and take it along for a drive test to see how the vehicle behaves in real driving situations. You can use the internal record feature to store all eight parameters and download the information to a PC when you return.
Wireless OBDII : Our wireless module for OBDII Applications provides real time data from the OBDII port on all 1996 and newer vehicles. This data is available to be viewed live in the dynamometer software and is also recorded into the dyno run.
You can view all support channels of the OBDII data, such as spark advance, throttle position, engine coolant temperatures, inlet air temperature, calculated load, and numerous other parameters right along side your dyno results.
Drag-Tree: Now you can perform 1/4 mile drag simulations on the dyno. Within a 1/10th of a second accuracy the drag tree features dual Pre-stage & Stage bulbs and the flood lamps are spaced in accordance to NHRA/IHRA National Event trees. Our trees are made of 100% structural aluminum with a 25 lb steel base stand.
INCLUDES: 6 foot aluminum tree, Incandescent Flood Lamps, 40 ft cable, 25 lb base stand, cigarette lighter adapter for the eliminator practice tree, and 2 vehicle connections (so you can sit in your race car and practice). Also includes special Dynocom harness that plugs directly into the Dynocom JBOX.